Disc Mower

Disc mower PRONAR PDF301C

Disc mower PRONAR PDF301C is a front disc mower with condicioner which is mounted on the tractor’s three-point linkage. The mower requires PTO at the front of the tractor and one hydraulic section. Disc mower PRONAR PDF301C was designed primarily for working on heavy, uneven terrain. Its main element is the proven and reliable PRONAR cutting bar, guaranteeing high quality of mowing. The robust construction of the machine is based on modern materials and latest production technologies. In combination with a large ground following ability, the PDF301C can handle work in all conditions, while maintaining an excellent cut quality. Mower’s mowing performance, at a speed of 10km / h, is 3 ha / h. To operate disc mower PRONAR PDF 301C, only a 75 hp tractor is needed

Disc mower PRONAR PDF301C – main features:


Disc mower Pronar PDF301C is equipped with a tine conditioner that accelerates the process of drying the swath, which allows to increase the yield of the forage harvest. The degree of conditioning of the material can be adjusted depending on the needs and type of mown grass. The conditioner drive was moved to the right side, balancing the angular drive of the slat drive, located on the left. Thanks to this solution, the cutting and loosening unit always stays in balance, which ensures even pressure of the cutter bar on the ground.
Disc mower PRONAR PDF301CThe wide range of ground copying of disc mower PDF301C is one of its biggest advantages – it is 700 mm (450 mm / 14 ° up, 250 mm / 10 ° down) and the cross-copying range is 24 °. This ensures perfect adhesion of the cutter bar to the ground at a constant angle (regardless of field conditions) and clean and aesthetic cut.
Two strong flotation springs regulate the pressure of the cutting and loosening unit on the ground.
On the mower’s suspension the cutting and loosening unit is mounted in a trailed system, thanks to which the PDF301C – when encountering an obstacle (e.g. stone) – can freely defeat it.
The drive disk provides easy access to the drive connector without removing the slat from the mower’s frame.
PRONAR cutting bar is a high-strength cutting bar with an additional stiffening profile enclosed in the body of the slat. It is equipped with discs of innovative shape, what provides lower cutting resistance and lower power demand per unit of cutting width. The enlarged, high-quality gears used in the slat have low noise emissions, thanks to which the mower works quietly. Such option significantly influences the comfort of work.
Additional protective skids, made of hardened, abrasion resistant steel, are mounted as standard. Thanks to them, the cutting bar is additionally protected against mechanical damage. The operator can easily replace them after use.
Operating the mower is facilitated by the system of quick replacement of knives. The operator can replace worn knives at any time, without having to unscrew the cutter bar, thanks to a special tool, made of durable steel, making it easier to change them. In addition, the standard equipment of the mower is an additional set of knives.
Thanks to folding side covers, the width of the mower in the transport position does not exceed 3 meters. Disc mower PRONAR PDF301C
The swath width adjustment range is from 1.34 to 2,04 and it is carried out by two scrapers.
Aprons ensure safety during work, and an easy way of lifting them. This allows the operator a quick replacement of knives, control of the technical condition of the machine or supplementation of operating fluids without the need of disassembling it.
Technical specification of standard equipment
Total width in working position 3570 mm
Height in working position 1300 mm
Lenght in working positiony 1940 mm
Width in transport position ( raised side protections) min/max 2980 mm
Working width 3000
Swath width min/max 1340/2040 mm
Tare weight 1220 kg
Min. power requirement 55/75 kW/HP
Efficiency ( for recommended working width) 3 ha/h
PTO speed 1000 rpm/min
Suspension Front linkage cat. II acc. to ISO 730-1
Number of disc 7
Number of knives (item) 14
left 8
right 6
Type of cuting knives twisted
Knives dimensions 120x49x4 Ø21
Rotationspeed of discs 3000 rpm/min
Ground following ability    
up +14 (450)
down 10 (250)
transverse +/- 24
Transport position – horizontally at the front of the tractor Raised on mowers cylinder and linkage
Required hydraulic output Hydraulic connection at the front of the tractor
Swath conditioner drive
PTO shaft Standard
Additional set of knifes Standard
Spray RAL 6010  400 ml Standard

PRONAR PDF301C standard equipment:

  • Additional protective skids made of hardened, abrasion resistant steel
    • Drive shaft with 900 Nm clutch
    • PTO shaft profile 1 3 / 8’z6
    • Flotation chains
    • Double swath scrapers
    • Triangle hitching system to fit tractor’s three-point linkage
    • Lifted front apron
    • Side cover folded up
    • An additional set of knives
    • A special tool, made of durable steel, facilitating the replacement of knives,
    • Cultivator (conditioner) with spirally positioned and freely clamped tines

PRONAR PDF301C optional equipment:

  • Tube for documents
  • PTO shaft for left PTO rotation

Disc mower PRONAR PDF340C

The PRONAR PDF340C disc mower is a front-mounted mower with swath conditioner mounted on the front three-point linkage. To operate the mower, the tractor must be equipped with a front three-point linkage and one hydraulic section. The mowing width is as large as 3.4 m, which significantly increases the efficiency and functionality of the machine. The PRONAR PDF340C disc mower is designed primarily for mowing on difficult and uneven terrain. Its main component is a durable and reliable PRONAR cutter bar, which is equipped with an additional stiffening profile enclosed in the cutter bar body. A sturdy machine design is based on modern materials and production technologies. Safety of use is ensured by a 1200 Nm friction overload clutch. With its very flexible ground surface tracking, the PRONAR PDF340C disc mower can cope with all conditions, while maintaining excellent mowing quality. The mowing capacity at a speed of 10 km/h is 3.4 ha/h. A tractor with a power of at least 95 HP is required to drive the PRONAR PDF340C disc mower.

Technical specification of standard equipment
Total width in working position 4000 mm
Lenght in working position 1800 mm
Width in transport position (raised side protections) 3400 mm
Working width 3400 mm
Swath width min/max 1400 / 2040 mm
Empty weight 1300 kg
Min. power requirement 70/95 kW/HP
Efficiency ( for recommended working width) 3,4 ha/h
PTO speed 1000 rpm/min
Suspension Front linkage cat. II acc. to ISO 730-1
Number of disc 8
Number of knives 16
left 8
right 8
Type of cuting knives twisted
Knives dimensions 120x49x4 Ø21 mm
Rotationspeed of discs 3000 rpm/min
Recommended working speed 10 km/h
Ground following ability
up +14 (450) º (mm)
down -10 (250) º (mm)
transverse +/- 24 º
Transport position – horizontally at the front of the tractor Raised on mowers cylinder and linkage
Required hydraulic output Hydraulic connection at the front of the tractor
Swath conditioner drive
PTO shaft Standard
Additional set of knifes Standard
Spray RAL 6010  400 ml Standard

 

Additional equipment:
Tube for documents
Connecting to reverse PTO shaft (CW or CCW direction)

Disc mower PRONAR PDK220

PRONAR PDK220 rear mounted disc mower is a compact, robust, characterized by lightweight structure where PRONAR cutter bar is applied. PRONAR disc mower can be easily mounted on various tractors. Minimum tractor power requirement for this mower is 30 hp. Classic suspension guarantees uniform pressure of cutter bar on the surface. Disc mower PRONAR PDK220 has three transport positions which is a big advantage among other mowers manufacturers.
Floating position of the hydraulic lever guarantees smooth drive transmission even on large irregularities of the ground. Side suspension allows to mow on the slopes ranging from + 900 up to -220. The mower is protected by a safety fuse, which at the time of collision with an obstacle slides apart and the mower is moved backwards minimizing the possible effects of the impact.

About 50% lower power consumption compared to drum mowers.
Spring tensioner reduces fuel consumption and attrition of the cutter bar.
Extensive range of inclination facilitates enables operation on uneven and steep surface.
Allows to work with older tractors without any changes in the hydraulics. It requires only one hydraulic connector.
The right shape of discs ensures lower cutting resistance and power demand during cutting.

Total width in working position 4110 mm
Total height in working position 1120 mm
Length in working position 1430 mm
Length in transport position min/max 1430/4440 mm
Width in transport position min/max 1250/1740 mm
Height in transport position min/max 980/2720 mm
Working width 2200 mm
Swath width min/max 1450 mm
Recommended working speed 10 km/h
Efficiency (for recommended working width) 2.2 ha/h
Weight 520 kg
Min. power requirement 22/30 kW/HP
PTO speed 540 rpm
Linkage system Cat. II and III acc. ISO 730-1
Number of disks (item) 5
Number of knives (item) 10
left 4
right 6
Type of cutting knives twisted
Rotation speed of discs 3265 rpm/min
Ground following ability +90/-22 [º]
Transport position:
vertically at the side of a tractor hydraulically adjustable
vertically at the rear of a tractor manual handling beam
horizontally at the rear of a tractor manual handling beam
( recomended for short transportation)
Required hydraulic output 1 output at the back of a tractor
Quick knifes replacement Standard
PTO shaft Standard
Additional set of knifes Standard
Spray RAL 6010  400 ml Standard

Disc mower PRONAR PDT260

Disc mower PRONAR PDT260 – central suspension which was used in the mower ensures an excellent operation on uneven and steep surface, clean and aesthetic cut and also optimum cutting height. Another advantage of this design is the three – step adjustment system of stay springs – 70, 80 or 90 kg which guarantees optimum pressure of the mower on the ground depending on the type of surface from soft soil, peat, up to the hard and dry. Extensive range of inclination (-16º to + 11º) facilitates operation on uneven and steep surface.
All components in direct contact with the ground are made of hardened boron steel.

Transporting the mower can take place in three different positions:

  • vertically at the rear of the tractor;
  • vertically at the side of the tractor;
  • horizontally at the rear of the tractor.

This model has light but strong structure where high quality cutter bars made of materials with increased strength were used. Cutter bars were designed in PRONAR Department of Implementation and tested in highly demanding conditions. The results meet the requirements of even the most demanding farmers.

Due to the quick replacement of blades at the front and at the back of the cutter bar.
Components in direct contact with the ground are made of hardened boron steel.
Gears with ground teeth that reduce noise.
The right shape of discs ensures lower cutting resistance and power demand during cutting.
Extensive range of inclination facilitates enables operation on uneven and steep surface.

Total width in working position 4500 mm
Total height in working position 1300 mm
Length in working position 1290 mm
Length in transport position min/max 1290/3990 mm
Width in transport position min/max 1430/1760 mm
Height in transport position min/max 1480/3320 mm
Working width 2600 mm
Swath width min/max 1200/1600 mm
Recommended working speed 10 km/h
Efficiency (for recommended working width) 2,6 ha/h
Weight 640 kg
Min. power requirement 33/45 kW/HP
PTO speed 540 rpm
Linkage system Cat. II and III acc. ISO 730-1
Number of disks (item) 6
Number of knives (item) 12
left 6
right 6
Type of cutting knives twisted
The dimensions of the knives 120x49x4 Ø21 mm
Rotation speed of discs 3130 rpm/min
Ground following ability +11/-16 [º]
Transport position:
vertically at the side of a tractor hydraulically adjustable
vertically at the rear of a tractor hydraulically adjustable
horizontally at the rear of a tractor hydraulically adjustable ( recomennded for short transportation)
Required hydraulic output One double-acting section and one double-acting section with floating position
Quick knifes replacement Standard
PTO shaft Standard
Additional set of knifes Standard
Spray RAL 6010  400 ml Standard
Additional equipment:
Double scraper

Disc mower PRONAR PDT260C

PRONAR PDT260C rear mounted disc mower. Central suspension which was used in the mower ensures an excellent operation on uneven and steep surface, clean and aesthetic cut and also optimum cutting height. Another advantage of this design is the three – step adjustment system of stay springs – 70, 80 or 90 kg which guarantees optimum pressure of the mower on the ground depending on the type of surface from soft soil, peat, up to the hard and dry. Extensive range of inclination (-16º to + 11º) facilitates operation on uneven and steep surface.

All components in direct contact with the ground are made of hardened boron steel.

PRONAR PDT 260C rear mounted disc mower is equipped with a swath conditioner. This mower performs simultaneous grass mowing and swath conditioning. Consequently, grass is dried faster because conditioner teeth distribute mown material uniformly.

Transporting the mower can take place in three different positions:

  • vertically at the rear of the tractor;
  • vertically at the side of the tractor;
  • horizontally at the rear of the tractor.

This model has light but strong structure where high quality cutter bars made of materials with increased strength were used. Cutter bars were designed in PRONAR Department of Implementation and tested in highly demanding conditions. The results meet the requirements of even the most demanding farmers.

Due to the quick replacement of blades at the front and at the back of the cutter bar.
Components in direct contact with the ground are made of hardened boron steel.
Gears with ground teeth that reduce noise.
The right shape of discs ensures lower cutting resistance and power demand during cutting.
Extensive range of inclination facilitates enables operation on uneven and steep surface..

Total width in working position 4500 mm
Total height in working position 1300 mm
Length in working position 1765 mm
Length in transport position min/max 1765/3990 mm
Width in transport position min/max 1735/1760 mm
Height in transport position min/max 1480/3320 mm
Working width 2600 mm
Swath width min/max 1300/1900 mm
Recommended mowing speed 10 km/h
Efficiency (for recommended working width) 2,6 ha/h
Weight 860 kg
Min. power requirement 44/60 kW/HP
PTO speed 540 rpm
Linkage system Cat. II and III acc. ISO 730-1
Number of disks (item) 6
Number of knives (item) 12
left 6
right 6
Type of cutting knives twisted
Rotation speed of discs 3130 rpm/min
Swath conditioner drive belt gearbox
Belt size SBP 1525
Number of belts 3 item
Ground following ability +11/-16 [º]
Transport position:
vertically at the side of a tractor hydraulically adjustable
vertically at the rear of a tractor hydraulically adjustable
horizontally at the rear of a tractor hydraulically adjustable ( recomennded for short transportation)
Required hydraulic output One double-acting section and one double-acting section with floating position
Quick knifes replacement Standard
PTO shaft Standard
Additional set of knifes Standard
Spray RAL 6010  400 ml Standard
Additional equipment:
Double scraper

Disc mower PRONAR PDT300

PRONAR PDT300 rear mounted disc mower. Central suspension which was used in the mower ensures an excellent operation on uneven and steep surface, clean and aesthetic cut and also optimum cutting height. Another advantage of this design is the three – step adjustment system of stay springs – 70, 80 or 90 kg which guarantees optimum pressure of the mower on the ground depending on the type of surface from soft soil, peat, up to the hard and dry. Extensive range of inclination (-16º to + 11º) facilitates operation on uneven and steep surface.

All components in direct contact with the ground are made of hardened boron steel.

Transporting the mower can take place in three different positions:

  • vertically at the rear of the tractor;
  • vertically at the side of the tractor;
  • horizontally at the rear of the tractor.

This model has light but strong structure where high quality cutter bars made of materials with increased strength were used. Cutter bars were designed in PRONAR Department of Implementation and tested in highly demanding conditions. The results meet the requirements of even the most demanding farmers.

Due to the quick replacement of blades at the front and at the back of the cutter bar.
Components in direct contact with the ground are made of hardened boron steel.
Gears with ground teeth that reduce noise.
The right shape of discs ensures lower cutting resistance and power demand during cutting.
Extensive range of inclination facilitates enables operation on uneven and steep surface..

Total width in working position 4920 mm
Total height in working position 1300 mm
Length in working position 1290 mm
Length in transport position min/max 1290/4410 mm
Width in transport position min/max 1430/1760 mm
Height in transport position min/max 1480/3740 mm
Working width 3000 mm
Swath width min/max 1200/2000 mm
Recommended working speed 10 km/h
Efficiency (for recommended working width) 3 ha/h
Weight 740 kg
Min. power requirement 44/60 kW/HP
PTO speed 1000 rpm
Linkage system Cat. II and III acc. ISO 730-1
Number of disks (item) 7
Number of knives (item) 14
left 8
right 6
Type of cutting knives twisted
Rotation speed of discs 3000 rpm/min
Ground following ability +11/-16 [º]
Transport position:
vertically at the side of a tractor hydraulically adjustable
vertically at the rear of a tractor hydraulically adjustable
horizontally at the rear of a tractor hydraulically adjustable ( recomennded for short transportation)
Required hydraulic output One double-acting section and one double-acting section with floating position
Quick knifes replacement Standard
PTO shaft Standard
Additional set of knifes Standard
Spray RAL 6010  400 ml Standard
     
Additional equipment:
PTO speed 540 rpm

Disc mower PRONAR PDT300C

PRONAR PDT300C rear mounted disc mower. Central suspension which was used in the mower ensures an excellent operation on uneven and steep surface, clean and aesthetic cut and also optimum cutting height. Another advantage of this design is the three – step adjustment system of stay springs – 70, 80 or 90 kg which guarantees optimum pressure of the mower on the ground depending on the type of surface from soft soil, peat, up to the hard and dry. Extensive range of inclination (-16º to + 11º) facilitates operation on uneven and steep surface.

All components in direct contact with the ground are made of hardened boron steel.

PRONAR PDT 300C rear mounted disc mower is equipped with a swath conditioner. This mower performs simultaneous grass mowing and swath conditioning. Consequently, grass is dried faster because conditioner teeth distribute mown material uniformly.

Transporting the mower can take place in three different positions:

  • vertically at the rear of the tractor;
  • vertically at the side of the tractor;
  • horizontally at the rear of the tractor.

This model has light but strong structure where high quality cutter bars made of materials with increased strength were used. Cutter bars were designed in PRONAR Department of Implementation and tested in highly demanding conditions. The results meet the requirements of even the most demanding farmers.

Due to the quick replacement of blades at the front and at the back of the cutter bar.
Components in direct contact with the ground are made of hardened boron steel.
Gears with ground teeth that reduce noise.
The right shape of discs ensures lower cutting resistance and power demand during cutting.
Extensive range of inclination facilitates enables operation on uneven and steep surface..

 

 

Total width in working position 4920 mm
Total height in working position 1300 mm
Length in working position 1765 mm
Length in transport position min/max 1765/4410 mm
Width in transport position min/max 1735/1760 mm
Height in transport position min/max 1480/3740 mm
Working width 3000 mm
Swath width min/max 1500/2300 mm
Recommended mowing speed 10 km/h
Efficiency (for recommended working width) 3 ha/h
Weight 930 kg
Min. power requirement 55/75 kW/HP
PTO speed 1000 rpm
Linkage system Cat. II and III acc. ISO 730-1
Number of disks (item) 7
Number of knives (item) 14
left 8
right 6
Type of cutting knives twisted
The dimensions of the knives 120x49x4 Ø21 mm
Rotation speed of discs 3000 rpm/min
Swath conditioner drive belt gearbox
Belt size SBP 1525
Number of belts 3 item
Ground following ability +11/-16 [º]
Transport position:
vertically at the side of a tractor hydraulically adjustable
vertically at the rear of a tractor hydraulically adjustable
horizontally at the rear of a tractor hydraulically adjustable ( recomennded for short transportation)
Required hydraulic output One double-acting section and one double-acting section with floating position
Quick knifes replacement Standard
PTO shaft Standard
Additional set of knifes Standard
     
Additional equipment:
PTO speed 540 rmp

Disc mower PRONAR PDT340

PRONAR PDT300C rear mounted disc mower. Central suspension which was used in the mower ensures an excellent operation on uneven and steep surface, clean and aesthetic cut and also optimum cutting height. Another advantage of this design is the three – step adjustment system of stay springs – 70, 80 or 90 kg which guarantees optimum pressure of the mower on the ground depending on the

PRONAR PDT340 rear mounted disc mower. Central suspension which was used in the mower ensures an excellent operation on uneven and steep surface, clean and aesthetic cut and also optimum cutting height. Another advantage of this design is the three – step adjustment system of stay springs – 70, 80 or 90 kg which guarantees optimum pressure of the mower on the ground depending on the type of surface from soft soil, peat, up to the hard and dry. Extensive range of inclination (-16º to + 11º) facilitates operation on uneven and steep surface.

All components in direct contact with the ground are made of hardened boron steel.

Transporting the mower can take place in three different positions:

  • vertically at the rear of the tractor;
  • vertically at the side of the tractor;
  • horizontally at the rear of the tractor.

This model has light but strong structure where high quality cutter bars made of materials with increased strength were used. Cutter bars were designed in PRONAR Department of Implementation and tested in highly demanding conditions. The results meet the requirements of even the most demanding farmers.

Due to the quick replacement of blades at the front and at the back of the cutter bar.
Components in direct contact with the ground are made of hardened boron steel.
Gears with ground teeth that reduce noise.
The right shape of discs ensures lower cutting resistance and power demand during cutting.
Extensive range of inclination facilitates enables operation on uneven and steep surface..

 

 

Total width in working position 5340 mm
Total height in working position 1300 mm
Length in working position 1290 mm
Length in transport position min/max 1290/4830 mm
Width in transport position min/max 1430/1760 mm
Height in transport position min/max 1480/4160 mm
Working width 3400 mm
Swath width min/max 1500/2400 mm
Recommended working speed 10 km/h
Efficiency (for recommended working width) 3,4 ha/h
Weight 800 kg
Min. power requirement 59/80 kW/HP
PTO speed 1000 rpm
Linkage system Cat. II and III acc. ISO 730-1
Number of disks (item) 8
Number of knives (item) 16
left 8
right 8
Type of cutting knives twisted
The dimensions of the knives 120x49x4 Ø21 mm
Rotation speed of discs 3000 rpm/min
Ground following ability +11/-16 [º]
Transport position:
vertically at the side of a tractor hydraulically adjustable
vertically at the rear of a tractor hydraulically adjustable
horizontally at the rear of a tractor hydraulically adjustable ( recomennded for short transportation)
Required hydraulic output one double-acting section and one double-acting section with floating position
Quick knifes replacement Standard
PTO shaft Standard
Additional set of knifes Standard
Spray RAL 6010  400 ml Standard