Mulching mower PRONAR KPR500
The KPR500 mulching mower has been designed to meet the expectations of users looking for effective and multi-purpose machines for working on large areas. The machine with a 5-meter working width is perfect for mowing and mulching grass, weeds, reeds, stubble and bushes. The large angle of deflection of the wings in relation to the main deck (25° downwards and upwards) ensures optimal ground surface tracking. The six-wheel running gear with wide tires allows for smooth operation also in marshy and wet terrain without leaving deep ruts. Adjustment of mowing height is easy – you only need to change the number of adjustment plates.
Working width | 5200 | mm |
Width in transport position (depends on the settings) | below 3000 | mm |
Height in working position: | 2500 | mm |
Length in transport position | 5700 | mm |
Working width | 5000 | mm |
Overlapping knives | 125 | mm |
Cutting height range | 25 – 400 | mm |
Empty weight | 2800 | kg |
Drawbar hitch load | 1050 | kg |
Minimal tractor power requirement | 88/120* | kW/HP |
PTO speed | 1000 | rpm |
Drawbar hitch | field Ø40 | |
Number of cutting heads | 3 | pcs |
Number of knives on the cutting head | 3 | pcs |
Rotational speed of heads | 1000 | rpm |
Transport position | Pulled on the hook, folded wings, secured with a blockade, suspension system raised maximally up. | |
Numbers of wheels | 6 | pcs |
Tyres | 10.0/75-15.3 10PR | |
Required hydraulic outputs of the tractor | One single acting section and one single acting section with float position. | |
*the power demand depends very much on the working conditions and the properties of the material being shredded |
Additional equipment:
Drawbar rotary Ø50
Cushioned suspension
Drawbar to connect with the upper hitch of the tractor
Ground following wheels in front of the side wings
Cutting heads with 6 knives